Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Arlington?
Panel replacement in Arlington typically costs $250 – $500 per section for a residential door, including the section itself, color-matched hardware, and labor to remove and reinstall the tracks and hinges it touches. Replacing one damaged section usually lands near the low end of that range; two sections or a full setup with newer opener integration pushes toward the top. These are estimates for the Arlington market, and the written estimate we provide after we see the door sets the final price.
If your door has a dented, cracked, or rusted section, you don’t need a whole new door. You need the right section for your exact model. We work on the major manufacturers – Clopay, Amarr, Wayne Dalton, Raynor, and the rest – so we can match the panel and get the repair done the first visit. Call (844) 484-2584 for a free estimate.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items usually break out for a single-section replacement around Arlington. Every job is different, and the written estimate is what counts, but these typical ranges should help you plan.
| Line Item | Typical Estimated Range |
|---|---|
| Single panel replacement (one section) | $250 – $500 |
| Two or more sections replaced together | $250 – $500 per section |
| Panel replacement with track realignment | $120 – $240 added |
| Panel replacement with roller replacement | $110 – $220 added |
| Related spring repair (if a spring is also failing) | $180 – $340 per spring |
| Cable repair (if cables are worn alongside the panel damage) | $130 – $250 |
| Opener repair if the opener is part of the problem | $120 – $320 |
| Full garage door repair (when damage goes beyond panels) | $150 – $600 |
What pushes the number up: a panel that has to be custom-ordered in a discontinued color, a door with two or more sections damaged, a bent track that has to be straightened or replaced before the new panel will seat correctly, and any worn rollers or cables that surface once the door is opened up. What pulls it down: a single section, a common color and model still in production, and hardware that’s still in good shape. On a heavy wooden door, the cost of the section itself runs higher than on a steel door. On a newer insulated steel door, the sections are often in stock and the labor is straightforward. We’ll walk you through which side of that line your door falls on before any work starts.
One thing worth knowing: a section that’s only dented, with intact hardware and a straight track, usually costs less to replace than a full door. Compare that $250 – $500 per-section range against the $700 – $2200 you’d spend on a new door installation before you decide. We handle both, so there’s no pressure either way – repair or replace, honestly.
What Affects Panel Replacement Pricing in Arlington
- Panel material and construction. A standard steel section is the cheapest to replace. Insulated steel costs more. Aluminum and wood are in the middle to upper end depending on the door. Composite and glass-inlay sections sit at the top of the range because the section itself is expensive to source.
- Number of sections damaged. A single dented section is one thing. Two or three damaged sections from a backed-into door or a rough impact push the cost up because each section is priced separately and the door has to come down further to swap them. We quote per section so you can see exactly what each one adds.
- Color and style match. If your door is a current Clopay or Amarr model in a standard color, the section is usually a direct match. If the door is older or a discontinued line, we may need to order a close-match section, and that can push the price toward the top of the $250 – $500 range. We’ll tell you up front if a perfect match isn’t available so you can decide how close is close enough.
- Age and condition of surrounding hardware. When we pull a section out, we see the tracks, rollers, hinges, and cables underneath. If the rollers are flat, the hinges are seized, or the track has a bend, addressing it during the same visit costs less than coming back later. A track realignment adds $120 – $240, and roller replacement adds $110 – $220.
- Panel position on the door. A top section that meets the opener and the header bracket involves more careful alignment than a bottom section. A bottom section often touches the bottom seal, which may need replacing at the same time. Position rarely changes labor by more than an hour, but it’s a real factor.
- Whether the opener needs attention too. If the door got hit hard enough to damage a panel, the opener may have taken some of the force. We check it while we’re there. Opener repairs run $120 – $320, and if the unit is nearing the end of its service life, we’ll let you know whether it’s worth fixing or replacing – not just default to the bigger job.
How to Save on Panel Replacement
There are a few honest ways to keep the number down without sacrificing the repair.
- Fix it while it’s one section. A dented section that’s left alone can let water in, and water in Arlington’s summer thunderstorms works its way into the section seams and the bottom corner joints over a couple of seasons. One section now beats two sections later.
- Address hardware on the same visit. If a roller or hinge is going bad, replacing it while the door is already taken apart adds a small line item instead of a second trip charge and a second labor block. Ask us to look at the whole door while we’re swapping the panel.
- Skip the cosmetic upgrade. If your only goal is to get the door working and looking solid, a color-matched section does that. A specialty finish or glass option costs more and doesn’t change how the door operates.
- Get an honest repair-vs-replace call. A door with one damaged section on an otherwise sound frame is almost always a repair. A door with three or four bad sections, rusted through at the bottom, or failing on multiple fronts can be cheaper to replace over the next few years than to patch section by section. We’ll run both numbers for you without steering you toward the bigger ticket.
- Ask for a free estimate. The number we quote after seeing the door is the number you plan around. Call (844) 484-2584 and we’ll get eyes on it – the estimate costs nothing, and we’ll tell you plainly whether the panel is the real problem or whether something underneath it is.
One sizeable caveat on DIY: garage door springs and cables are under very high tension and can cause serious injury if they let go while someone is working near them. We don’t recommend homeowners remove or adjust panels near a loaded spring. That’s a job for a trained technician who knows how to block the door safely. Our technicians have up to 11 years of experience, and we’ll handle the removal and reinstall so you’re nowhere near the spring line.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Arlington?
Panel replacement in Arlington typically costs $250 – $500 per section, including the section, hardware, and labor. Most single-section jobs land near the middle of that range. Two sections or a door that needs the tracks touched up will run higher. The written estimate sets the exact price – call (844) 484-2584 for a free one.
Is it cheaper to replace a panel or the whole door?
Replacing one panel at $250 – $500 is almost always cheaper than a full door at $700 – $2200. The math flips only when three or four sections are damaged, the bottom sections have rusted through, or the door has other problems stacked on top. We’ll quote both so you can compare – call (844) 484-2584 and we’ll give you the honest read, repair or replace.
Can you match the color and style of my existing door?
Usually, yes. We work on Clopay, Amarr, Wayne Dalton, and Raynor doors, plus the other major brands, so most current and recent models have a matching section available. Older or discontinued lines may need a close-match, which we’ll flag before ordering so you can decide. Call (844) 484-2584 and have your door’s model name or a photo ready – it speeds up the match.
How long does a panel replacement take?
A single section typically takes one to two hours on site, depending on the door’s condition and whether the tracks or rollers need attention while we’re in there. A two-section job may take most of a visit. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and same-day service is often available – call (844) 484-2584 to get on the schedule.
What if my door is dented from a car or a storm?
Impact damage to a single section is usually a $250 – $500 panel replacement. The section gets swapped, the track gets checked for bending, and the opener gets tested since it may have absorbed some of the hit. If the impact bent the track, that adds $120 – $240. Call (844) 484-2584 and we’ll look at the whole door, not just the dent.
Do you fix the opener too, or just the door?
We handle both. Panel replacement is one job, and opener repair is another – but when impact or a misaligned section has put strain on the opener, we check it during the same visit. Opener repair runs $120 – $320, and a fresh opener install runs $250 – $550. Call (844) 484-2584 for a free estimate on either.
Why homeowners in Arlington call us
We’re a garage door specialist – garage doors only. That’s the whole business, and that focus is why we can diagnose a damaged section, order the correct replacement, and get it seated and tested on the first visit more often than a general handyman who does doors between other jobs. We work on LiftMaster, Chamberlain, Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor, so there’s a good chance we know your door and your opener the moment we see them. Garage doors are what we do, and we’d rather fix the section than sell you a whole new door you don’t need. That’s how we’ve built our reputation in Arlington, and it’s why we come back to the same neighborhoods for repeat work.
If you’re weighing the panel repair against other work on the door, our garage door repair page covers the full range of fixes from $150 – $600, and if you’re not sure what’s wrong, the spring repair guide explains the symptom most people mistake for a panel problem. If the opener itself is the loud one, the opener installation guide runs through what replacement involves. And if you’re comparing this to a bigger project, the new door installation page has the full range. Every one of those pages is here so you can decide before you call, not after.
Get a free estimate on your panel replacement
Call (844) 484-2584 and we’ll take a look at your door, tell you exactly what a section replacement would cost, and be honest about whether it’s worth doing at all. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, and we’re licensed and insured. Reach out to the team at Kingsley Garage Door Repair for a free estimate on panel replacement in Arlington today.
Pricing reflects the Arlington market as of 2026. Kingsley Garage Door Repair offers free estimates – call (844) 484-2584.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Walsh"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Cedric Jackson