Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Company in Arlington, VA
If you’re planning a garage door installation in Arlington, the first thing to know is that this isn’t a town where one standard door fits the block. Arlington is an older inner-ring suburb where narrow, low-clearance single-car garages sit a few doors from tall two-car garages on brand-new infill builds, so measurements and opener choices get made on-site, not over the phone. Add humid summers, freeze-thaw winters that work torsion springs hard, and mature oaks that drop limbs on tracks and panels, and you get a door market that rewards a specialist. We do garage doors only, across eight major brands, and our technicians have up to 11 years of experience. Call (844) 484-2584 for a free estimate.
Why Arlington Homes Are Different
Arlington’s housing stock is the story here. A large share of the county is 1920s to 1950s brick-and-frame bungalows, colonials and Cape Cods with compact single-car garages, and many of those garages have low ceilings that simply won’t take today’s standard 7-foot door or a high-lift opener without careful planning. Then the county’s infill and teardown-rebuild cycle, especially along the Orange and Silver Line corridors, drops a taller two-car garage right next door. On the same street you’ll find an original 1950s setup and a brand-new tall-door system that share nothing in common.
The climate adds its own pressure. Arlington’s humid subtropical summers swell weather seals and bottom rubber, and freeze-thaw winters cycle torsion springs through expansion and contraction until they fatigue. Summer thunderstorms bring down limbs that bend tracks and dent steel panels. And on the older streets of North Arlington, doors are often recessed down a narrow driveway tight against a neighboring lot line, which limits clearance for ladders and equipment. None of that changes the price of a door, but all of it changes how a job gets measured and installed.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Arlington Services
Most Arlington homeowners call us about one of two things: a door that’s stopped working, or an opener that’s misbehaving.
Garage Door Repair in Arlington
Repair work in Arlington rarely looks like the textbook version. A door that jumped its track here is as likely to have been knocked loose by a falling oak limb as worn out by age, and a snapped spring on a 1950s single-car garage is a very different job from the same failure on a tall modern door. We diagnose before we touch anything, then explain what failed and why. Our technicians have up to 11 years of experience, and we work on Clopay, Amarr and the other major door lines you’ll find on Arlington streets. For the full breakdown, see Garage Door Repair in Arlington.

Garage Door Opener Repair in Arlington
Opener problems in Arlington often trace back to the door, not the motor. A low-clearance 1950s garage with a tired spring makes any opener strain, and a modern high-lift setup on a newer infill build needs a different travel and force setting entirely. We check the door’s balance first, then the opener, so you don’t pay for a motor you didn’t need. Chamberlain, Genie, LiftMaster and Craftsman units all get the same diagnostic approach. Details live on our Garage Door Opener Repair in Arlington page.

Garage Door Installation in Arlington
Garage door installation in Arlington starts with the house, not the catalog. A 1940s bungalow with a low-ceiling single-car garage and a newer teardown-rebuild two-car garage down the block need completely different doors, headers and openers, and the county’s freeze-thaw winters mean the weather seal and bottom rubber have to be chosen for real cold, not just for looks. We measure on-site every time, because assuming a size here is how you end up with a door that won’t clear the ceiling. Our Garage Door Installation service covers the whole job from measurement to final balance check.
Garage Door Replacement
Signs you need it
Panel corrosion, repeated track damage from falling limbs, or a door that no longer fits a remodeled opening are the usual signals that replacement makes more sense than another round of repairs.
What it costs in Arlington
Replacement doors in Arlington typically run $700 to $2,200 installed, depending on size, material and whether the opening needs framing work, and the written estimate sets the final price.
How we do it
We measure the opening and ceiling height on-site, remove and dispose of the old door and hardware, install and balance the new door, and test the opener travel before we leave.
Garage Door Installation Service
Signs you need it
A new-build garage, a gut renovation, or an opening that was never fitted with a door at all calls for a full installation rather than a swap.
What it costs in Arlington
New installation typically runs $700 to $2,200 for the door and hardware, with the final figure set by the written estimate once we’ve measured the opening.
How we do it
We set the tracks and torsion system to the actual ceiling height, hang and balance the door, then match the opener to the door weight rather than to a default spec.
What Garage Door Installation Costs in Arlington
These are typical estimated ranges for Arlington work. Your written estimate sets the final price.
| Item | Typical range in Arlington |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Do I need a permit to install a garage door in Arlington?
Usually not for a straight door swap, but structural changes to the opening or a new garage often do. Ask Arlington County’s building department before work starts, and we’ll tell you what the job involves so you can ask the right question.
Can you install a door on a low-clearance 1950s garage?
Yes. That’s most of the older housing stock here. We measure ceiling height and headroom on-site and specify a door and low-profile opener combination that actually fits, instead of forcing a standard 7-foot setup into a space that can’t take it.
Brands We Service in Arlington
We work on Clopay, Amarr, Chamberlain, Genie and four other major door and opener lines, and that brand familiarity is what lets us diagnose the first visit and order the right part the first time. We don’t stock parts locally, so lead time depends on the manufacturer, but the measurement and ordering happen on the same visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Arlington, VA
| Service | Typical range in Arlington |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Opener repair | $120 – $320 |
| Garage door repair | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
In Arlington, price climbs with the age of the opening: low-ceiling 1950s garages often need custom sizing, while storm-damaged tracks and panels on North Arlington’s tree-lined streets add repair labor before a door can even be measured. A matched pair of springs costs about twice the single-spring range. What we quote before work starts is what you pay, and it’s agreed in writing.
Neighborhoods We Serve in Arlington
We cover the whole county, from the older streets of North Arlington with their tight, recessed driveways to the newer infill builds along the Orange and Silver Line corridors. Because door sizes and ceiling heights vary house to house here, we measure on every job rather than working from a standard spec. Call (844) 484-2584. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Typical neighborhoods we work in include:
- Ballston
- Cherrydale
- Clarendon
- Ashton Heights
- Arlington Heights
Service Area – Cities Near Arlington
We work across Arlington and the surrounding communities, and the same on-site measurement rule applies everywhere we go. If you’re just outside the county line, we likely cover you. Homeowners in Bailey’s Crossroads, VA and Tysons, VA call us for installation and opener work, and we also serve Wakefield, VA and Kings Park, VA. Call (844) 484-2584. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Arlington
For repairs, we offer same-day service where the schedule allows, with fast dispatch from 7am to 7pm, Sunday through Friday. Installation work is measured and scheduled rather than same-day. Call (844) 484-2584. We answer 24/7.
Check with Arlington County’s building department on permits, and with your HOA on style or color rules. Many Arlington neighborhoods have design guidelines, so it’s worth confirming before you order a door. We’ll give you the measurements you need for either conversation.
We cover the full county, from the older North Arlington streets to the newer builds along the Orange and Silver Line corridors. If you’re unsure whether your address is in range, call and we’ll confirm. Call (844) 484-2584. We answer 24/7.
When you’re ready to move on a door or an opener, we’ll measure the opening, explain the options in plain terms, and put the price in writing before anything starts. Call (844) 484-2584 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Arlington Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Walsh"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Cedric Jackson