Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Arlington?
Spring replacement in Arlington typically costs $180 – $340 for a single torsion spring, and most two-spring doors run about twice that because both springs are almost always replaced as a matched pair. The exact figure depends on the spring type, the door’s weight, and whether the job turns up worn cables or bearings once the door is open. We give you the number in writing before anyone touches the door, and that written estimate is the price.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work usually breaks down for Arlington homeowners. These are typical estimated ranges for the local market, not quotes – your written estimate sets the final price.
- Single torsion spring replacement: $180 – $340
- Matched pair of torsion springs: roughly double the single-spring range, since both springs share the load and wear at the same rate
- Extension spring replacement (per side): priced within the same single-spring range, confirmed on site
- Cable repair, if a cable is frayed or off its drum: $130 – $250
- Roller replacement, if the rollers are flat-spotted or noisy: $110 – $220
- Track realignment, if the door is binding: $120 – $240
- Panel replacement, if a section is dented or cracked: $250 – $500
- Opener repair, if the opener is straining against a broken spring: $120 – $320
What pushes a spring job toward the top of the range? Heavier doors, high-lift or unusual track configurations, and springs that have to be custom-wound to match an older door. What keeps it near the bottom? A standard two-car door with a clean pair of torsion springs and nothing else worn out. We handle springs on Clopay, Amarr, Wayne Dalton, and Raynor doors regularly, and we know how each manufacturer’s hardware is set up before we arrive.
What Affects Spring Replacement Pricing in Arlington
Arlington’s housing stock is a big part of why spring jobs vary here. The county mixes older colonials and brick ramblers in neighborhoods like Ashton Heights and Lyon Village with newer townhomes and condos around Ballston and Clarendon, and each era of door uses different spring setups. A few things move the price:
- Spring type and count. Torsion springs mounted on a shaft above the door are priced per spring. Extension springs run along the sides. Most modern Arlington doors use two torsion springs, which means a pair replacement.
- Door weight and material. A solid wood or insulated steel door needs a heavier spring than a basic hollow steel door, and heavier springs cost more. This comes up often with older wood doors in North Arlington.
- Cycle life of the replacement spring. Standard springs and high-cycle springs are priced differently. If your door opens several times a day, a higher-cycle spring is worth discussing.
- Condition of the rest of the system. A broken spring often means a cable, roller, or bearing is close behind. We check the whole assembly and tell you what actually needs replacing now versus later.
- Access and ceiling height. Tight garage ceilings, low headroom, or a car parked directly under the door can add time to the job. We’ll tell you up front if that affects the estimate.
- Brand-specific parts. Doors from Clopay, Amarr, Wayne Dalton, and Raynor sometimes need manufacturer-matched springs or hardware, and we source those correctly the first time.
How to Save on Spring Replacement
The biggest savings come from catching problems early. A spring that’s stretching or making noise is cheaper to deal with than a door that’s come down hard and damaged panels or bent a track. A few practical tips:
- Replace both springs at once. If one torsion spring breaks, the other is usually the same age and close to failing. Replacing the pair costs more than one spring but less than two separate service visits.
- Fix the small stuff alongside. If rollers or cables are worn, handling them during the spring job can save you a second call-out later.
- Get a written estimate first. We offer free estimates, and we’ll tell you honestly whether the door needs repair or replacement – no pressure to upsize the job. Call (844) 484-2584 to schedule.
- Keep the door balanced. A door that’s binding wears springs faster. We’ll check balance during the visit so you’re not back here in a year.
For a fuller picture of what routine service costs in the area, see our Kingsley Garage Door Repair overview, and for local details specific to this market, visit our Arlington page.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Arlington?
Typically $180 – $340 for one spring, and about twice that for the matched pair most doors need. Call (844) 484-2584 for a free, exact estimate – the written quote is the price.
Is it cheaper to repair a spring or replace the whole door?
Repairing the spring is almost always cheaper unless the door has structural damage or is more than a decade past its serviceable life. We look at the whole system and tell you straight whether repair or replacement makes sense for your door.
Can you replace a broken spring the same day?
Often yes. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day spring jobs are common when the parts are on hand. Call (844) 484-2584 to check availability.
Why did my spring break and what does it cost to fix?
Springs are rated for a set number of cycles and fail from metal fatigue, not misuse. Replacing one runs $180 – $340; a matched pair costs about double. If something else is worn, we’ll price it clearly on the estimate.
Do you work on my brand of door or opener?
Yes – we work on eight major brands including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we know your specific door and hardware. Call (844) 484-2584 and we’ll confirm your setup before the visit.
Pricing reflects the Arlington market as of 2026. Kingsley Garage Door Repair offers free estimates – call (844) 484-2584.
Written by the team at Kingsley Garage Door Repair.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Walsh"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Cedric Jackson