Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Arlington?
New garage door installation in Arlington typically costs $700 – $2,200, depending on door size, material, and whether you’re adding a new opener. Most single-car door replacements land at the lower end of that range, while insulated double-car doors with a new opener push toward the top. A written estimate sets the final price, and we give you that estimate for free before any work begins.
We’re Kingsley Garage Door Repair, and garage doors are the only thing we do. That focus matters on installation day, because a door has to balance, seal, and operate correctly against your specific opening. We aren’t a general handyman outfit fitting a door between other jobs. We install and repair doors and openers from Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman, so we know how each one fits and how each one is meant to run.
Key takeaways
- A typical new door installation in Arlington runs $700 – $2,200.
- Adding a new opener adds $250 – $550 to the job.
- Insulation, material, and door size are the biggest cost drivers.
- Replacing a single panel costs $250 – $500 and can be a smarter call than a full install if the rest of the door is sound.
- Our technicians have up to 11 years of experience, and estimates are free.
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers typically break down for an installation in Arlington. These are estimated ranges for the local market, not final quotes. Your written estimate is the price you’ll pay.
| Item | Typical Estimated Range |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation (new or replacement) | $250 – $550 |
| Panel replacement (repair, not full install) | $250 – $500 |
| Full garage door repair (when replacement isn’t needed) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Roller replacement | $110 – $220 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. That matters at install time, because a new door comes with springs sized to its weight, and if your old springs are being reused or replaced you’ll want them matched correctly.
What pushes the price up? A double-car door costs more than a single. Insulated doors cost more than uninsulated. A new opener with a belt drive and smart features sits at the top of the opener range. Custom sizes, a door that doesn’t match standard opening dimensions, and disposal of the old door can all add to the job. What brings it down? Standard sizing, a door that fits an existing opening without modification, and reusing an opener that’s still in good condition.
What Affects Garage Door Installation Pricing in Arlington
- Door size. A single-car door and a double-car door use different amounts of material and hardware. The bigger the opening, the higher the price within the range.
- Material. Steel doors are the most common and sit in the middle of the range. Wood and composite doors cost more because they need different framing and finishing.
- Insulation. An insulated door costs more than an uninsulated one, but it’s worth considering if your garage shares a wall with the house. Arlington’s humid summers and chilly winters make an insulated door a practical choice for attached garages.
- Opener type. If you’re adding an opener at the same time, a basic chain drive is cheaper than a belt drive or a smart opener. We install LiftMaster, Chamberlain, Genie, and Craftsman openers, so you have options across the price range.
- Old door removal and disposal. Taking out and hauling away the old door is part of the job, and a heavier or more awkward door takes more labor. It’s built into the estimate.
- Opening condition. If the framing, tracks, or header need attention, that’s extra work. A door that fits a standard opening goes in faster than one that needs modification.
How to Save on Garage Door Installation
There’s no magic discount, but there are smart ways to keep the number down without cutting corners.
- Get a free written estimate first. A number over the phone is a guess. A written estimate tells you exactly what’s included. Call (844) 484-2584 and we’ll set one up.
- Ask whether repair beats replacement. If your door has a single damaged panel, a bent track, or worn rollers, fixing it can cost far less than a full install. Panel replacement runs $250 – $500, and track realignment runs $120 – $240. Our repair-first approach means we’ll tell you honestly whether a new door is warranted.
- Reuse a working opener. If your current opener is in good shape and the new door is a similar weight, you may not need a new one. That saves the $250 – $550 opener range.
- Stick to standard sizes. A door that fits a standard opening without modification avoids custom pricing.
- Bundle the opener with the door. If you need both, doing them together means one visit and one setup, which is often more efficient than scheduling them separately.
One more word on safety: garage door springs and cables are under high tension, and the torsion system on a new install has to be set correctly or the door won’t balance and the opener will strain. This is not a job to attempt yourself. Springs and cables can cause serious injury, so leave the tensioning and door balancing to a trained technician. We handle it as part of the install.
Should You Repair or Replace Your Garage Door?
Repair is usually the right call when the door structure is sound and the problem is one component. Replace when the door itself is failing in multiple ways or the repair cost approaches the cost of a new door. Here’s the practical split:
- Repair if you have a broken spring ($180 – $340 for one spring), a snapped cable ($130 – $250), a bad opener ($120 – $320), a bent track ($120 – $240), or worn rollers ($110 – $220).
- Repair if one panel is crushed or dented ($250 – $500) and the rest of the door is in good shape.
- Replace if the door is rusted through in several places, the panels are separating, or you’ve had repeated repairs on the same door.
Because we handle both repair and installation, there’s no financial reason for us to push a replacement you don’t need. We’d rather fix what’s fixable.
How Long Does a Garage Door Installation Take in Arlington?
A standard single-car door install takes a few hours, and a double-car door or a job that includes a new opener can run longer. Most installations are completed in a single visit. The timeline depends on the door, the opening condition, and whether the old door needs to come out first.
Local conditions can affect scheduling. Arlington’s older neighborhoods often have garages with openings that aren’t perfectly square, which can add time to fit a new door properly. Newer construction usually goes faster. We’ll tell you what to expect when we give you the estimate.
What’s Included in the Installation Price?
A written estimate from us covers the door, the hardware, the springs sized to the door, and the labor to remove the old door and set the new one. If you’re adding an opener, that’s quoted separately using the $250 – $550 range. We don’t surprise you with add-ons after the fact. The estimate is the price.
What about permit requirements? Installation of a new garage door sometimes requires a permit depending on how the work affects the structure. This varies by jurisdiction, so check with the City of Arlington’s building department before scheduling if you’re unsure. We’ll flag it during the estimate if it looks like a permit applies.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Arlington?
New garage door installation in Arlington typically runs $700 – $2,200, depending on size, material, insulation, and whether you add an opener. A basic single-car steel door sits near the bottom of that range; an insulated double-car door with a new opener sits near the top. Call (844) 484-2584 for a free estimate – the written quote sets your final price.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when the door structure is sound and the problem is one part. A single spring repair runs $180 – $340 and a panel replacement runs $250 – $500, both well below a full install. Replacement makes more sense when the door is failing in several ways. Call (844) 484-2584 and we’ll give you an honest read on which way to go.
How much does a garage door opener cost installed in Arlington?
Opener installation typically runs $250 – $550, depending on the drive type and features. A basic chain drive sits at the low end; a belt drive or a smart opener with app control sits at the high end. We install LiftMaster, Chamberlain, Genie, and Craftsman openers, so you can compare across brands. Call (844) 484-2584 for a free quote.
Can you install a garage door the same day?
Same-day service is often possible when the door is in stock and the opening is standard, though scheduling depends on the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 484-2584 and we’ll tell you the soonest opening.
Do you install garage doors in my part of Arlington?
We serve homeowners across Arlington, from the older neighborhoods near Clarendon and Ballston to the newer developments farther out. We install and repair doors and openers from eight major brands, so whatever you have or want, we can handle it. For local details, see our Arlington page, or call (844) 484-2584 to confirm your address and get a free estimate.
Why Call Kingsley for Your Arlington Installation
We work on your brand, and that’s the whole point of hiring a specialist. Whether your door is a Clopay, Amarr, Wayne Dalton, or Raynor, and whether your opener is a LiftMaster, Chamberlain, Genie, or Craftsman, we’ve worked on it and know how it’s meant to fit and run. That means fewer callbacks and fewer repeat visits.
We cover the full lifecycle: repair and installation under one name, so you don’t have to coordinate between contractors. Our technicians have up to 11 years of experience, and we’re licensed and insured. Estimates are free, and we’ll give you a straight answer about repair versus replacement.
If you’re in Arlington and thinking about a new garage door, or wondering whether yours is worth saving, call us. We’ll look at your door, explain your options, and give you a written price. No pressure, no upsell, just a clear number.
Call (844) 484-2584. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Pricing reflects the Arlington market as of 2026. Kingsley Garage Door Repair offers free estimates – call (844) 484-2584.
Written by the team at Kingsley Garage Door Repair.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Walsh"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Cedric Jackson