Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Arlington?
Garage door repair in Arlington typically costs between $150 and $600, depending on what failed and which parts are involved. A single broken spring is the most common call at $180 to $340, while a cable or roller job often lands at the lower end. We give you a written estimate before any work starts, so the number you approve is the number the job is priced at.
Arlington garages are a mix of tight alley-loading setups in neighborhoods like Ashton Heights and Ballston, plus wider detached garages out toward Cherrydale and Donaldson Run. That layout matters for price. A door boxed in by a low ceiling or a tight return wall takes longer to work on safely than one with clear space on both sides, and that time shows up in the estimate. We work on doors from Clopay, Amarr, Wayne Dalton and Raynor, and on openers from LiftMaster, Chamberlain, Genie and Craftsman, so the diagnosis happens on the first visit rather than after a second trip for parts.
Garage Door Repair Cost Breakdown (2026)
These are typical estimated ranges for the Arlington market in 2026. Your written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (overall) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
One thing worth knowing about spring pricing: the $180 to $340 range is for one spring. Most residential doors in Arlington run a matched pair, and when one spring snaps the other has usually taken the same wear, so the pair is normally replaced together at roughly twice that range for the two.
What pushes a job toward the top of its range is usually access and condition, not the part itself. A door that has jumped its track after a cable let go needs the track straightened, the cable replaced and the door rebalanced, which stacks labor. A door with a good track and a single failed component sits at the bottom. Older doors out toward Arlington Forest and Lyon Village sometimes use hardware that takes more time to match than a current-production door, and we factor that into the quote rather than discovering it halfway through.
What Affects Garage Door Repair Pricing in Arlington
- Which part failed. A roller or cable is a quick, lower-cost job. A torsion spring is more involved and priced accordingly. A door that won’t move at all can be any of several failures, and the diagnosis decides the number.
- Door age and hardware style. Arlington has a lot of older homes with original or once-replaced doors. Pre-1990s hardware can be harder to source, and matching it correctly takes longer than pulling a current production part.
- Garage layout and clearance. Low-headroom garages and tight side clearances common in the older Arlington neighborhoods slow the work down. So does a car parked in the way, or a garage packed with storage along the walls.
- Whether it’s a one-off fix or a set. Replacing one worn roller rarely makes sense when the other eleven are the same age. Bundling the wear items into one visit keeps the total down compared to three separate calls.
- Opener type and brand. A LiftMaster or Chamberlain unit with a straightforward logic board issue prices differently than a Genie or Craftsman with a failed drive gear. We work on all four, plus others, so the diagnosis doesn’t stall on an unfamiliar unit.
- Repair versus replace. A door with a bent bottom section after a car nudged it can often be repaired for a fraction of a new door. A door with a cracked panel across the middle and rusted hinges is usually a replacement conversation. We do both repair and installation, so there’s no reason for us to steer you toward the more expensive answer.
If you want the local picture on how these calls usually go, our garage door repair page covers the common failures we see across Arlington and what each one typically involves.
Can You Explain What Drives the Higher-End Repair Costs?
The higher end of the $150 to $600 repair range usually comes from a job where more than one thing has failed. A snapped cable that lets the door drop and bend a track is the classic case: you’re paying for the cable, the track realignment and the rebalance, not just one part. Spring failures on a paired system also push toward the top, because both springs are normally replaced together. And panel damage from a car or a hard impact sits higher than a mechanical fix because the section has to be sourced and fitted.
None of this is guesswork on our end. We look at the door, the opener, the springs and the tracks before quoting, and we tell you what’s actually broken versus what’s just old. Call (844) 484-2584 if you want a straight answer on your door before committing to anything.
How to Save on Garage Door Repair
The single biggest saver is catching a problem early. A cable that’s starting to fray, or a door that’s begun to shudder on the way up, is a cheap fix. The same cable failing completely can take a track with it and turn a small job into a bigger one. If your door has started making a noise it didn’t make last year, that’s worth a look now rather than later.
A few practical habits that keep costs down:
- Get the estimate in writing before work starts. We do this as standard. It protects you from discovering extra charges after the fact.
- Group small fixes into one visit. Rollers, hinges and a tune-up done together cost less than three separate calls.
- Don’t force a stuck door. Pulling on a door with a broken spring can bend panels and tracks, and that turns a spring repair into a spring plus panel repair.
- Ask about the opener when the door is being serviced. Openers and doors wear together. A quick check while the technician is already there can head off a separate call later.
- Keep the garage clear enough to work in. It’s a small thing, but a garage packed to the walls adds time to every job.
Estimates are free. Call (844) 484-2584 and we’ll book a time that works for you.
Is It Cheaper to Repair or Replace a Garage Door in Arlington?
Repair is almost always cheaper than replacement. A $180 to $340 spring repair or a $130 to $250 cable fix is a fraction of the $700 to $2200 a new door installation typically runs. Replacement only makes financial sense when the door’s structure is compromised, when multiple panels are damaged, or when the hardware is failing across the board in a way that would cost more to patch than to replace.
We do both repair and installation, which means the recommendation you get isn’t shaped by which one pays us better. If your door has years left in it, we’ll say so. Call (844) 484-2584 for an honest assessment.
How Long Does Garage Door Repair Take in Arlington?
Most repairs are done in a single visit, often within a couple of hours. A spring or cable replacement is typically the longest of the common jobs; a roller swap or track adjustment is quicker. Same-day service is often possible depending on the schedule and the parts needed.
The exception is anything that requires a part we don’t have on hand, like a specific panel for an older Clopay or Raynor door. In that case we’ll tell you the timeline upfront rather than leaving you guessing. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Can You Fix a Garage Door the Same Day?
Usually, yes. Most Arlington garage door repairs are same-day jobs when the call comes in during dispatch hours, because the parts involved in spring, cable, roller and track work are standard. Opener repairs can occasionally need a specific board or gear that has to be ordered, and we’ll tell you that on the call rather than after we arrive.
If you’re calling outside dispatch hours, we’ll book you into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 484-2584.
Do You Charge for Estimates in Arlington?
No. Estimates are free. We look at the door, diagnose the problem and give you a written price before any work begins. There’s no service-call charge to come out and tell you what’s wrong.
That matters because garage door problems can look like one thing and be another. A door that won’t open might be a failed spring, a dead opener, a snapped cable or a bound track, and the fix for each is priced differently. A free estimate means you know the number before you commit. Call (844) 484-2584 to book one.
What Should You Check Before Calling for a Repair?
A few quick checks can help you describe the problem accurately and sometimes save you a call. Look at the springs above the door: if you see a visible gap in a torsion spring, it’s broken. Check whether the door is balanced by disconnecting the opener and lifting it halfway by hand; if it won’t stay put, the springs or cables need attention. Look along the tracks for dents or bends, and check the rollers for flat spots or wobble.
What you shouldn’t do is try to fix a spring or cable yourself. Those parts are under high tension, and a torsion spring can release violently if it’s adjusted without the right tools and know-how. Springs, cables and the brackets that hold them are the one part of a garage door that genuinely warrants a trained technician. If something looks wrong up there, stop and call. We answer 24/7. Call (844) 484-2584.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Arlington?
Garage door repair in Arlington typically runs $150 to $600, with most common jobs landing in the $180 to $340 range for a single spring or $130 to $250 for a cable. The written estimate sets the final price. Call (844) 484-2584 for an exact quote – estimates are free.
How much does a broken spring cost to fix in Arlington?
A single spring repair in Arlington typically costs $180 to $340. If your door uses a matched pair, which most residential doors do, both are usually replaced together at roughly twice that range for the two. Call (844) 484-2584 to get a quote for your specific door.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in almost every case. A typical repair runs $150 to $600, while a new door installation typically runs $700 to $2200. Replacement only makes sense when the door’s structure is compromised or the hardware is failing across the board. Call (844) 484-2584 for an honest read on your door – estimates are free.
How much does opener repair or replacement cost in Arlington?
Opener repair in Arlington typically costs $120 to $320, while a full opener installation typically runs $250 to $550. The difference usually comes down to whether the motor and logic board are sound. We work on LiftMaster, Chamberlain, Genie and Craftsman units, among others. Call (844) 484-2584 for an exact quote.
Can you come today?
Same-day service is often available in Arlington when you call during dispatch hours. Most spring, cable, roller and track repairs can be done in a single visit. Call (844) 484-2584. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose Kingsley Garage Door Repair for Your Arlington Garage Door?
We do garage doors only. That’s the whole business: repair, opener repair and new installation. Every technician’s knowledge is built around doors and openers rather than spread across a dozen unrelated trades, and our technicians have up to 11 years of experience. When we look at your door, we’re looking at something we see every working day.
We’re factory-familiar with eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That covers the large majority of what’s hanging in Arlington garages. Knowing the brand means knowing the failure patterns, the correct part numbers and the right installation technique, which cuts down on repeat visits and callbacks.
We also fix and install, so the recommendation you get isn’t tilted toward one or the other. A door with life left in it gets repaired. A door that’s genuinely done gets an honest conversation about replacement. You can read more about how we approach the work at Kingsley Garage Door Repair.
Get a Free Estimate on Your Arlington Garage Door
If your door is stuck, noisy, off its track or just not behaving the way it used to, the fastest way to a real number is a call. We’ll ask a few questions, book a time, and give you a written estimate before any work starts. No service-call charge to come out and diagnose.
Call (844) 484-2584 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Kingsley Garage Door Repair offers free estimates – call (844) 484-2584.
Written by the team at Kingsley Garage Door Repair.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Walsh"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Cedric Jackson